Wall coverings for immediate use
For those looking for fast wall renovation without compromising on durability, Novelio® Painted wall coverings require no additional painting to ensure durable protection, offering a huge time saving on application and easy installation.
The decorative range comes painted for an easier application, but still provides a superior level of protection to walls and ceilings for impact resistance. What's more, the painted wall covering is ideal for crack prevention and crack covering for wall renovation.
When it comes to cost and time savings, Novelio® Painted impact resistant wallcovering can save 2 days of paint drying time - which equates to 60% of working time - and a material saving of 12 litres of paint for a 15 m² room.
- Painted for the easiest application
- Crack prevention and abrasion resistance
- Crack covering for wall renovation
- Time saving: 2 days of paint drying time - 60% of working time
- Material saving: 12 litres of paint for a 15 m² room
- Easily re-paintable
Declaration of performance (1)
Technical Data Sheet (3)
What kind of glue should I use on the fiberglass wallcoverings?
We recommend ready-to-use glue formulated for fiberglass wall covering or a standard glue for wallcoverings – e.g. ADFORS glue, Metylan Ovalit. For best results, use ready-mixed glue, not the powdered ones. Although powdered glues is less expensive, it's more demanding to mix properly and provides less adhesion for Novelio wall coverings.
Are Novelio fiberglass wall coverings safe and non-toxic ?
Yes, our fiberglass wall coverings are safe and non-toxic, due to the size of the fibers used in the production of Novelio wall coverings (close to 10 microns (μm) in diameter).
Fiberglass is recognized by the World Health organization as non-carcinogenic, if above 3 microns (μm) in diameter.
How should the wall coverings be applied on internal and external corners?
Novelio wall coverings have a specially designed coating that ensures trouble-free folding and bending around internal and extenal corners.
At least 20cm of material should extend past the corner on each side to ensure proper adhesion.
What method should I use to join the edges of the wall coverings?
All ADFORS Novelio fiberglass wall coverings feature precisely cut edges and are designed to be applied edge to edge.
Pay close attention to the edges of the roll, as any damage to them will make the seam more visible.
For non-woven textiles (vlies), you can perform a double-cut to make the joints invisible.
How should the wall coverings be installed in humid environments?
Humidity has no effect on the installation of the fiberglass wall coverings. You just need to ensure that the proper glue is used for application in humid environments.
Please keep in mind that Novelio wall coverings should not come into direct contact with water (e.g. from a shower), unless this is something specifically designed within the system.