Novelio® wall covering Classic EasyGlue
Novelio® Classic EasyGlue fiberglass wall coverings come pre-glued for a faster installation and up to 50% saving on application time.
Pre-glued wall coverings
These pre-glued fiberglass wall coverings are an ideal solution for those looking to speed up installation time without having to compromise on design or durability.
Providing up to a 50% saving on application time, the decorative impact resistant wall coverings boast a homogeneous film of glue on the back of the wallpaper, which is activated by water, eliminating the need for glue.
What's more, the Novelio® Classic EasyGlue wallpaper is ideal for crack prevention and abrasion resistance, plus crack covering for wall renovation.
By choosing Novelio® Classic EasyGlue, application time can be reduced by 30% - or even up to 50% if the product is also pre-painted. In addition, there is a material saving of 7 kilograms of glue for a 15m2 room, and 7 litres of paint if the product is also pre-painted.
- Pre-glued for fast wall renovation
- Easily washable and re-paintable
- Durable protection of the wall - with 1 or 2 layers of acrylic paint
- Up to 50% saving on application time
Technical Data Sheet (7)
Declaration of performance (1)
Are Novelio fiberglass wall coverings safe and non-toxic ?
Yes, our fiberglass wall coverings are safe and non-toxic, due to the size of the fibers used in the production of Novelio wall coverings (close to 10 microns (μm) in diameter).
Fiberglass is recognized by the World Health organization as non-carcinogenic, if above 3 microns (μm) in diameter.
How should the wall coverings be applied on internal and external corners?
Novelio wall coverings have a specially designed coating that ensures trouble-free folding and bending around internal and extenal corners.
At least 20cm of material should extend past the corner on each side to ensure proper adhesion.
What method should I use to join the edges of the wall coverings?
All ADFORS Novelio fiberglass wall coverings feature precisely cut edges and are designed to be applied edge to edge.
Pay close attention to the edges of the roll, as any damage to them will make the seam more visible.
For non-woven textiles (vlies), you can perform a double-cut to make the joints invisible.
How should the wall coverings be installed in humid environments?
Humidity has no effect on the installation of the fiberglass wall coverings. You just need to ensure that the proper glue is used for application in humid environments.
Please keep in mind that Novelio wall coverings should not come into direct contact with water (e.g. from a shower), unless this is something specifically designed within the system.
What primer should I use to prepare the wall for fiberglass wall coverings?
Make sure to use the most suitable primer for your particular wall type. You can use ADFORS ready-to-use glue mixed with clean, cold water at a ratio of 1:1. This glue has been specifically formulated to work with Novelio wall coverings and ensures a stong bond with your wall.