Paintable wall coverings

Novelio® Mold-X Wall Covering

Brand
ADFORS Novelio®

Anti-mold fiberglass wallcover: Ideal for damp rooms, offering long-lasting protection against the development of mold.

Read full description >

Mold resistant wall coverings

These mould resistant fiberglass wall coverings stop the development of mould and bacteria on wall surfaces for more than 10 years. 

Mould and bacteria quickly develop under the influence of heat, humidity and some nutrients and can cause irritation, asthma and other ailments. The Mold-X treatment boasts an active ingredient that breaks the chain of bacteria and mould development, remaining active even after several coats of paint. 

This makes the Novelio® Mold-X mold resistant fiberglass wall covering ideal for kitchens, bathrooms and wet rooms in both private and public buildings.

  • Mold-X active ingredient treatment prevents the development of bacteria and mould
  • Impact and fire resistant
  • Durable and decorative

Patterns

Vlies

Mock-up Product reference Available widths Available lengths Weight
Image
GV130CM
1 m
50 m
130 g/m²

Ceiling

Mock-up Product reference Available widths Available lengths Weight
Image
N0101M
1 m
50 m
130 g/m²

Weaving

Mock-up Product reference Available widths Available lengths Weight
Image
N0130M
1 m
50 m
130 g/m²
T1013M
1 m
50 m
160 g/m²
Resources & Guides

Technical Data Sheet (4)

GV130CM Technical Data Sheet EN PDF - 128.95 KB
en
N0101M Technical Data Sheet EN PDF - 105.67 KB
en
N0130M Technical Data Sheet EN PDF - 105.95 KB
en
Wallcovering Novelio Paintable Technical Data Sheet PDF - 555.17 KB
en

Declaration of performance (1)

Wallcovering Declaration of Performance PDF - 129.68 KB
en

Certification (2)

Oekotex certificate 25.3.0033 EN PDF - 1.84 MB
en
Oekotex certificate 25.3.0073 EN PDF - 1.84 MB
en
FAQs on this product

Are Novelio fiberglass wall coverings safe and non-toxic ?

Yes, our fiberglass wall coverings are safe and non-toxic, due to the size of the fibers  used in the production of Novelio wall coverings (close to 10 microns (μm) in diameter).

Fiberglass is recognized by the World Health organization as non-carcinogenic, if above 3 microns (μm) in diameter.

What kind of glue should I use on the fiberglass wallcoverings?

We recommend ready-to-use glue formulated for fiberglass wall covering or a standard glue for wallcoverings – e.g. ADFORS glue, Metylan Ovalit. For best results, use ready-mixed glue, not the powdered ones. Although powdered glues is less expensive, it's more demanding to mix properly and provides less adhesion for Novelio wall coverings.

How should the wall coverings be applied on internal and external corners?

Novelio wall coverings have a specially designed coating that ensures trouble-free folding and bending around internal and extenal corners.

At least 20cm of material should extend past the corner on each side to ensure proper adhesion.

What method should I use to join the edges of the wall coverings?

All ADFORS Novelio fiberglass wall coverings feature precisely cut edges and are designed to be applied edge to edge.

Pay close attention to the edges of the roll, as any damage to them will make the seam more visible.

For non-woven textiles (vlies), you can perform a double-cut to make the joints invisible.

How should the wall coverings be installed in humid environments?

Humidity has no effect on the installation of the fiberglass wall coverings. You just need to ensure  that the proper glue is used for application in humid environments.

Please keep in mind that Novelio wall coverings should not come into direct contact with water (e.g. from a shower), unless this is something specifically designed within the system.