Paintable wall coverings

Novelio® wall covering EasyPaint (pre-painted)

Brand
ADFORS Novelio®

Novelio® EasyPaint fiberglass wall coverings require just one layer of paint to ensure durable protection, offering an application time saving of 30%.

Read full description >

Pre-painted wall coverings

For those looking for fast wall renovation without compromising on durability, Novelio® EasyPaint pre-painted wall coverings require just one layer of  paint to ensure durable protection, offering an application time saving of up to 30%.

The decorative range comes pre-painted for an easier application, but still provides a superior level of protection to walls and ceilings for impact resistance. What's more, the painted wall covering is ideal for crack prevention and crack covering for wall renovation.

When it comes to cost and time savings, Novelio® EasyPaint impact resistant wallcovering can save one day of paint drying time - which equates to  30% of working time - and a material saving of six litres of paint for a 15 m² room.  

  • Prepainted for an easier application
  • Crack prevention and abrasion resistance
  • Crack covering for wall renovation
  • Time saving: 1 day of  paint drying time - 30% of working time
  • Material saving: 6 litres of paint for a 15 m² room
  • Durable protection of the wall with only 1 layer of acrylic paint
  • Easily washable and re-paintable

Patterns

Flat

Mock-up Product reference Available widths Available lengths Weight
Image
CV180C
1 m
25 m
180 g/m²
CV200C
1 m
25 m
200 g/m2

Vlies

Mock-up Product reference Available widths Available lengths Weight
Image
GV130C
1 m
50 m
130 g/m²
GV190C
1 m
50 m
190 g/m²

Ceiling

Mock-up Product reference Available widths Available lengths Weight
Image
T1006C
1 m
50 m
155 g/m²

Braid

Mock-up Product reference Available widths Available lengths Weight
Image
T1009C
1 m
50 m
200 g/m²

Weaving

Mock-up Product reference Available widths Available lengths Weight
Image
T1010C
1 m
50 m
145 g/m²
T1013C
1 m
50 m
160 g/m²

Fishbone

Mock-up Product reference Available widths Available lengths Weight
Image
T2004C
1 m
50 m
190 g/m²

Small Fishbone

Mock-up Product reference Available widths Available lengths Weight
Image
T2001C
1 m
50 m
170 g/m²

Crepi

Mock-up Product reference Available widths Available lengths Weight
Image
T3011C
1 m
50 m
155 g/m²

Metis

Mock-up Product reference Available widths Available lengths Weight
Image
T1050C
1 m
50 m
125 g/m²
Resources & Guides

Declaration of performance (1)

Wallcovering Declaration of Performance PDF - 129.68 KB
en

Certification (2)

Oekotex certificate 25.3.0033 EN PDF - 1.84 MB
en
Oekotex certificate 25.3.0073 EN PDF - 1.84 MB
en

Technical Data Sheet (1)

Wallcovering Novelio Paintable Technical Data Sheet PDF - 555.17 KB
en
FAQs on this product

What kind of glue should I use on the fiberglass wallcoverings?

We recommend ready-to-use glue formulated for fiberglass wall covering or a standard glue for wallcoverings – e.g. ADFORS glue, Metylan Ovalit. For best results, use ready-mixed glue, not the powdered ones. Although powdered glues is less expensive, it's more demanding to mix properly and provides less adhesion for Novelio wall coverings.

How should the wall coverings be applied on internal and external corners?

Novelio wall coverings have a specially designed coating that ensures trouble-free folding and bending around internal and extenal corners.

At least 20cm of material should extend past the corner on each side to ensure proper adhesion.

What method should I use to join the edges of the wall coverings?

All ADFORS Novelio fiberglass wall coverings feature precisely cut edges and are designed to be applied edge to edge.

Pay close attention to the edges of the roll, as any damage to them will make the seam more visible.

For non-woven textiles (vlies), you can perform a double-cut to make the joints invisible.

How should the wall coverings be installed in humid environments?

Humidity has no effect on the installation of the fiberglass wall coverings. You just need to ensure  that the proper glue is used for application in humid environments.

Please keep in mind that Novelio wall coverings should not come into direct contact with water (e.g. from a shower), unless this is something specifically designed within the system.

How much glue should be applied on the wall coverings?

The optimal amount of glue is around 250g per m2. A good test for checking if you have the right amount of glue is  is to see  if you can draw in the glue with your finger.

It's important to spread the glue evenly on the fiberglass wall covering and make sure the layer has a uniform thickness. Remember that it's always better to have too much glue than not enough.