











Novelio® wall covering Decoration Sand coated
Novelio® Decoration Sand Coated wall coverings feature a sand coated layer that creates a unique two-tone finish, offering a stylish aesthetic alongside durable wall protection.
Non-traditional patterns
The Novelio® Decoration Sand Coated two tone fiberglass wall coverings are fire resistant, and free of any PVC made entirely from natural materials, allowing walls to breathe.
This eco friendly wallpaper also features patented CleanAir technology that effectively improves indoor air quality. Not only does CleanAir keep rooms fresh and clean for longer, it also provides protection for people with chemical sensitivities, with a specially designed coating that absorbs 70% of formaldehyde permanently in the air for up to ten years, even after several layers of paint.
- Unique two-tone finish
- Oekotex standard
- Fire resistant: Euroclass B-s1, d0 on substrate A1 or A2
- Class A+ very low emission of harmful pollutants
- CleanAir technology absorbs 70% of formaldehyde permanently in the air - effective for 10 years or more
- Choice of woven and non-woven patterns
Wood
Brushy
Matrix
Natte
Dedal
Crocodile
Technical Data Sheet (7)
Declaration of performance (1)
Certification (1)
Are Novelio fiberglass wall coverings safe and non-toxic ?
Yes, our fiberglass wall coverings are safe and non-toxic, due to the size of the fibers used in the production of Novelio wall coverings (close to 10 microns (μm) in diameter).
Fiberglass is recognized by the World Health organization as non-carcinogenic, if above 3 microns (μm) in diameter.
How should the wall coverings be applied on internal and external corners?
Novelio wall coverings have a specially designed coating that ensures trouble-free folding and bending around internal and extenal corners.
At least 20cm of material should extend past the corner on each side to ensure proper adhesion.
What method should I use to join the edges of the wall coverings?
All ADFORS Novelio fiberglass wall coverings feature precisely cut edges and are designed to be applied edge to edge.
Pay close attention to the edges of the roll, as any damage to them will make the seam more visible.
For non-woven textiles (vlies), you can perform a double-cut to make the joints invisible.
How should the wall coverings be installed in humid environments?
Humidity has no effect on the installation of the fiberglass wall coverings. You just need to ensure that the proper glue is used for application in humid environments.
Please keep in mind that Novelio wall coverings should not come into direct contact with water (e.g. from a shower), unless this is something specifically designed within the system.
How can I remove excess glue from the wall coverings?
Use a wet towel or sponge to remove the glue as soon as possible after application. This is key, as the glossiness of the wall covering's surface will be negatively affected if the glue is allowed to dry.